Middle School: Ms. Eisemann's 8th grade students
Robot designed and built using
Doctor Walt’s CAD for Kids program.
Our robot is dome-shaped. There is a little antenna on top. Two arms
come out from the side with clippers at the end to grab things and press
buttons. The antenna sends signals to a computer displaying everything
it does. On the left side there is an air chamber. There is a steering
propeller on the right side, along with thrusters to move up and down.
In the center there is a space for batteries to power the robot. There
is also a band going around the center of the robot that flashes news
and recent messages.
robot is a hover, and can fly around using the thruster. It also has
3 extendable legs to stand up on its own.
The robot has a voice recognition system so you can tell it what to
robot could unlock doors, pick things up,
robot buddy gets around with hover thrusters, which are located below
the craft. It steers with propeller thrusters and steering thrusters.
robot buddy has various tools on it that look like doors and windows.
These tools are air testers, thermometers, and inferred sensors.
will talk to it by antenna that lies on top of the house-like structure.
This sends a signal to the ship and NASA Headquarters. This transmits
any tests conducted.
robot buddy would take samples and test from other planets.
It could run errands for the astronauts on ISS.
robot can receive messages and/or missions. A mission could be to float
and maybe make a noise.